F Ball Styccobond F46 Pressure Sensitive Acrylic Adhesive

STYCCOBOND F46 is a solvent free pressure sensitive acrylic adhesive that dries to a permanent tacky film. It is used to reduce the incidence of trowel serrations shadowing through thin vinyl flooring and is designed to give strong initial tack and a high bond strength. It is protected against biodegradation and is suitable for use over normal underfloor heating installations and can be used for securing a wide range of PVC sheet and tile floorcoverings.

F46 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard. Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

This adhesive can be applied directly to epoxy resin STOPGAP waterproof surface membranes and other non-absorbent subfloors where the surface finish is smooth enough to permit the installation of resilient floorcoverings.

Features

True Pressure Sensitive Properties – ideal
for design floorcoverings
Excellent Tack
High Bond Strength
Excellent Plasticiser Resistance
Approved for marine use

Tub Sizes

15 litre bucket
5 litre bucket

Area Coverage Per Unit

15 litres – 1.5mm x 5mm Trowel = 75m2
15 litres – Fine Notch or A1 Trowel = 60m2
15 litres – A2 Trowel = 45m2

5 litres – 1.5mm x 5mm Trowel = 25m2
5 litres – Fine Notch or A1 Trowel = 20m2
5 litres – A2 Trowel = 15m2

Note: Coverage rates will depend on the condition and
absorbency of the subfloor.